TM 3-4240-284-30&P
2-15. COMPARTMENT CONTROL MODULE - MAINTENANCE INSTRUCTIONS (Cont).
ACTION
ITEM
LOCATION
REMOVAL
1. Disassemble CCM (p 2-171).
2. Remove insulation and unsolder wires from terminal
on DUST FAN DEFECT indicator light (1).
3. Remove knurled ring (2), nuts (3), and washer (4)
from light (1).
INSTALLATION
1. Insert DUST FAN DEFECT indicator light (1) in
panel (5) and secure with washer (4) and nut (3).
2. Install knurled ring (2).
3. Connect and solder wire leads. Refer to page 2-184.
4. Reassemble CCM (p 2-171).
REMOVAL
1. Disassemble CCM (p 2-171).
2. Remove insulation and unsolder wires from termi-
nals on CHANGE FILTER indicator light (1).
3. Remove knurled ring (2), nut (3), and washer (4)
from light (1).
INSTALLATION
1. Insert CHANGE FILTER indicator light (1) in
panel (5) and secure with washer (4) and nut (3).
2. Install knurled ring (2).
3. Connect and solder wire leads. Refer to page 2-184,
4.
Reassembly CCM (p 2-171).
2-177