TM 3-4240-284-30&P
2-15. COMPARTMENT CONTROL MODULE - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMOVAL
2. Unsolder wire leads from OCCUPIED switch/
indicator light (1).
3. Pry out and remove the lamp module (2),
4. Remove two screws (3).
5. Remove sleeve (4) and switch/indicator light (1).
INSTALLATION
NOTE
Lamp module is keyed to fit into light body at
only one rotational position. It maybe neces-
sary to turn the lamp module within the light
body to find the keyway.
1. Place module (2) in OCCUPIED switch/indicator
light (1) and position in panel (5) with the word
OCCUPIED right side up and level.
2. Remove module (2). Place sleeve (4) over switch/
indicator light (1) and secure with screws (3).
3. Replace module (2) in switch/indicator light (1).
REMOVAL
LOW PRESSURE switch/
indicator light
2. Unsolder wire leads from LOW PRESSURE
switchflndicator light (1).
3. Pry out and remove the lamp module (2),
4. Remove two screws (3).
5. Remove sleeve (4) and switch/indicator light(1).
2-180