TM 3-4240-286-20&P
ACTION
ITEM
LOCATION
INSTALLATION
Place screw (5) through support cable loop and screw
M12 Protective Entrance
Dust and moisture seal
hole at base of airduct inlet (3).
protective cap
Airduct Inlet
Reach through airduct inlet and install washer (6) and
nut (4). Tighten securely.
Place airduct hose (2) on airduct inlet (3).
Tighten hose clamp (1) securely.
Reach through airduct outlet and install screw (12).
M12 Protective Entrance
Dust and moisture seal
protective cap
Airduct Outlet
Place support cable loop, washers (14 and 15), and nut
(13) on screw (12). Tighten nut securely.
Place airduct hose (10) on airduct outlet (11).
Tighten hose clamp (9) securely.
2-61
