TM 3-4240-286-20&P
ACTION
ITEM
LOCATION
REMOVAL
Loosen hose clamp (1). Remove airduct hose (2) from
Dust and moisture seal
M12 Protective Entrance
inlet (3).
protective cap
Airduct Inlet
Reach through inlet and hold nut (4) with a wrench.
Remove screw (5) from nut (4), washer (6), and cable
loop on cap (7) from inlet (3).
Remove cap (7) from protective entrance (8).
Loosen hose clamp (9). Remove airduct hose (10) from
Dust and moisture seal
M 12 Protective Entrance
outlet (11).
protective cap
Airduct Outlet
Reach through outlet and hold screw (12) with a wrench.
Unscrew nut (13).
Remove washers (14 and 15) and screw (12).
Remove cap (16) from protective entrance (8).
2-59
