TM 3-4240-284-30&P
2-14. POWER DISTRIBUTION PANEL - MAINTENANCE lNSTRUCTIONS (Cont).
ACTION
ITEM
LOCATION
REMOVAL/INSTALLATION
REMOVAL
1. Unsolder wires from auxiliary switching printed cir-
Printed circuit assembly
Power Distribution Panel
cuit assembly (1).
2. Remove two nuts (2), washer (3), cable strap (4),
and two screws (5).
3. Remove auxiliary switching printed circuit assembly.
.
INSTALLATION
1. Position printed circuit board (1) on bracket and
install screws (5).
2. Install cable strap (4) and nut (2) on one screw.
Install washer (3) and nut (2) on the other.
3. Connect and solder wires to printed circuit assembly.
Refer to wiring diagram on page 4-169.
2-168