TM 3-4240-284-30&P
2-14. POWER DISTRIBUTION PANEL - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMOVAL
Power Distribution Panel
RFI filter
1. Remove five nuts (1), Iockwashers (2), and
washers (3) from filter terminals and release wir-
ing (4).
2. Unscrew nut (5).
3. unscrew four screws (6) and remove radio noise
filter.
4. Remove preformed packing (7) from radio noise
filter (8).
REPAIR
Preformed packing
Replace preformed packing (7) if unserviceable.
INSTALLATION
Power Distribution Panel
RFI filter
1. Place preformed packing (7) on radio noise filter (8).
2. Install radio noise filter in panel using four screws (6)
and nut (5).
3. Connect electrical wiring to the seven connectors.
Refer to page 2-169.
2-164