TM 3-4240-284-20&P
ACTION
ITEM
LOCATION
INSTALLATION
Place screw (5) through support cable loop and screw
Dust and moisture seal
M10 Protective Entrance
hole at base of airduct inlet (3).
protective cap
Airduct Inlet
Reach through airduct inlet and install washer (6) and
nut (4) Tighten security
Place airduct hose (2) on air duct inlet
Tighten hose clamps (1) securely
Reach through airduct outlet and install screw (12).
Dust and moisture seal
M10 Protective Entrance
protective cap
Airduct outlet
Place support cable loop, washers (14 and 15), and nut
(13) on screw (12). Tighten nut securely.
Place airduct hose (10) on airduct outlet (11).
Tighten hose damp (9) securely.
2-61
