TM 3-4240-284-20&P
ACTION
ITEM
LOCATlON
REMOVAL
Loosen hose clamps (1). Remove airduct hose (2). from
M10 Protective Entrance
Dust and moisture seal
inlet (3).
Airduct Inlet
protective
Reach through inlet and hold nut (4) with a wrench.
Remove screw (5) from nut (4), washer (6), and cable
loop on cap (7) from inlet (3).
Remove cap (7) from protective entrance (8).
Dust and moisture seal
Loosen hose clamp (9) Remove airduct hose (10) from
M10 Protective Entrance
Outlet (11).
Airduct Cutlet
protective cap
Reach through outlet hold screw (12) with a wrench.
Unscrew nut (13).
Remove washers (14 and 15) and screw (12).
Remove cap (16) from protective entrance (8).
2-59
