TM 3-4230-209-20&P
2-74
2-13. GUN AND SLURRY NOZZLE ASSEMBLIES (CONT).
REMARKS
ACTION
LOCATION/lTEM
Rockwood and All-Bann
Slurry Nozzle Assembly/
Screw orifice and deflector set (1) into nozzle (2). Hold rear of nozzle (2)
Orifice and deflector set (1)
with a wrench and tighten orifice and deflector set (1).
Nozzle (2)
Rotate knurled area of nozzle (2) until orifice and deflector set (1) closes.
NOTE
If you have an AII-Bann slurry nozzle assembly, go straight
to the gun assembly and begin with ball valve.
Rockwood Slurry Nozzle
Assembly/
The spacer ring and retaining ring are only used on
Insert spacer ring (3) and snap retaining ring (4) into front of nozzle (2).
spacer ring (3)
slurry nozzles manufactured by the Rockwood
Retaining ring (4)
Company.
Gun Assembly/
Ball valve (5)
Screw ball valve (5) and straight adapter (6) together and tighten.
Straight adapter (6)
Insert gasket (7) into slurry nozzle assembly (8) and screw them onto
Gasket (7)
Slurry nozzle assembly (8)
straight adapter (6) and tighten.
