TM 3-4230-209-20&P
2-70
2-12. PUMP UNIT (CONT).
REMARKS
ACTION
LOCATION/lTEM
R E A S S E M B L Y (CONT)
Pump Unit/Battety
Put storage battery (66) on battery pad (65) with the battery positive post
Storage battery (66)
located nearest the engine. Position battery retainer (67) so two hook
Battery retainer (67)
bolts (64) go through the two holes and battery retainer (67) is resting on
Flat washers (68)
storage battery (66). Put two flat washers (68) and two hexagon self-lock-
Hexagon self-locking
ing nuts (69) on end of hook bolts (64) and tighten.
nuts (69)
Reconnect positive battery cable (57) to the positive post and reconnect
ground cable (59) to the negative post of the storage battery. Tighten.
Pump Unit/Hose Reel
Wrap antiseizing tape around the external thread on hose reel elbow (70) in
Elbow (70)
a clockwise direction, and reconnect discharge hose assembly (71).
Discharge hose
Tighten the hose fitting (72).
assembly (71)
Hose fitting (72)
Using hose reel crank handle (77) stowed in the tool box, wind discharge
hose assembly (71) onto the hose reel.
Adapter (73) is not required when ball valve (74) is
Wrap antiseizing tape around the external threads of adapter (73) in a
Adapter (73)
supplied by All-Bann Enterprises, Inc., with 1-11 1/2
Ball valve (74)
clockwise direction (if used) and screw into end of discharge hose assem-
NPSH external thread.
bly (71) and tighten.
