Rockwood
Slurry Nozzle Assembly/
Retaining ring and spacer ring are only used on slurry
Unsnap retaining ring (5). Remove retaining ring (5) and spacer ring (6).
Retaining ring (5)
nozzle assemblies manufactured by the Rockwood
Spacer ring (6)
Company.
Rotate the knurled area of nozzle (7) to the left to open orifice and
Nozzle (7)
deflector set (8).
Orifice and deflector set (8)
Hold back of nozzle (7) with a wrench. Unscrew and remove orifice and
deflector set (8).
Rotate the knurled area of nozzle (7) to the left to open orifice and
All-Bann Slurry
deflector set (8).
Nozzle Assembly/
Nozzle (7)
Hold back of nozzle (7) with a wrench. Unscrew and remove orifice and
Orifice and deflector set (8)
deflector set (8).
Gun Assembly/
Remove dirt and corrosion. If the nozzle has been used to spray anything
All parts
but water, clean it with a small brush and general purpose detergent
mixed with water. Rinse with clean water and dry thoroughly.
Gun and Slurry Nozzle
Assemblies/
Repair by replacing authorized components.
All parts
TM 3-4230-209-20&P
2-73