Insert stem (5) through the hole in nut (6) then, as a unit, insert both into
Stem (5)
hose (1) until the rear of nut (6) is against the end of hose (1).
Nut (6)
Slide two hose clamps (3) over stem (5). Rotate the
second hose clamp so the buckle (4) is 180 from
the first hose clamp (3) to assure a better seal.
Insert the strap end (2) into the frame (7) of strap band clamping tool.
Frame (7)
Insert the winder (8) into the frame (7) and insert the strap end (2) through
Winder (8)
the winder (8). Use the ratchet tension wrench (9) to turn the winder (8)
Ratchet tension wrench (9)
and draw the hose clamp (3) tight.
TM 3-4230-209-20&P
2-77