2-82
TM 3-4230-209-20&P
2-16. EDUCTOR HOSE ASSEMBLY (CONT).
LOCATION/lTEM
ACTION
REMARKS
Eductor Hose Assembly/
Hose clamp (1)
Fabricate hose (2) according to figure E-2. Slide hose clamp (1) onto
Hose (2)
hose (2).
Stem (3)
Insert stem (3) through the hole in nut (4). Then, as a unit, insert both into
Nut (4)
hose (2) until the rear of nut (4) is against the end of hose (2).
Tighten hose clamp (1) (p 2-77).
Gasket (5)
Install gasket (5).