Section XVI. AIR OUTLET HOSE ASSEMBLY
unit by turning connector assembly (9, fig. 20).
92. Description and Function
(2) Remove gasket (12, fig. 8).
The description and function of the air outlet hose
b. Inspection and Maintenance.
assembly is given in paragraph 5.
(1) Insect gasket. for tears or wear and
replace if not fit for service.
93. Maintenance.
(2) Inspect hose clamp (5) for damage and
Organizational
maintenance
personnel
are
replace it not fit for service.
authorized to replace portions of the air outlet hose
(3) Clean with soap amid water and replace.
assembly.
c. Installation. Assemble as indicated.
a. Removal.
(1) Disconnect air outlet hose from filter
Section XVII. ELECTRICAL CABLE AND CONNECTOR PLUG
source.
94. Description and Function
(2) Remove cover (4, fig. 17) from terminal
The electrical cable and connector plug provide a
box mounted on the side of the motor (1).
means to connect the electric motor to the power source.
(3) Disconnect the two screws attaching the
cable to the terminal board, following the wiring diagram
95. Maintenance
in terminal box.
Organizational
maintenance
personnel
are
(4) Remove connector plug (9).
authorized to replace the electric cable and connector
b. Inspection and Maintenance.
plug.
(1) Inspect the connector for cracks or breaks
a. Removal.
or loose wires.
(2) Replace connector if cracked or broken.
Note. Remove only if inspection shows the
(3) Replace electric cable.
cable to be frayed or broken.
c. Installation. Reinstall as indicated.
(1) Disconnect the connector from the power
37