TM 3-4240-286-20&P
ACTION
ITEM
LOCATION
DISASSEMBLY
Remove screws (1), retainer (2), light lens (3), and dome
Protective Entrance Con-
Dome light
light gasket (4).
trol Module
Remove red lamp (5) by pressing in on the bulb and
rotating it counterclockwise. Pull red lamp from
socket (6).
Remove clear lamp (7) by pressing in on the bulb and
rotating it counterclockwise. Pull clear lamp from
socket (8).
REPAIR
Replace if unserviceable.
Lamps, screws, lens, and
dome light gasket
REASSEMBLY
Protective Entrance Con-
Dome light
Insert red lamp (5) in socket (6). Aline studs in lamp base
trol Module
with slot in socket. Press in and turn red lamp clockwise
until it locks in place.
Insert clear lamp (7) in socket (8). Aline studs in lamp
base with slot in socket. Press in and turn clear lamp
clockwise until it locks in place.
Place gasket (4) on dome light lens (3).
Place retainer (2) on gasket and aline screw holes.
Position assembly in place and install screws (1).
Tighten securely.
2-67