TM 3-4240-284-20&P
ACTION
ITEM
LOCATION
DISASSEMBLY
Protective Entrance Con-
Remove screws (1), retainer (2), light lens (3), and dome
Dome light
light gasket (4).
trol Module
Remove red lamp (5) by pressing in on the bulb and
rotating it counterclockwise. Pull red lamp from
socket (6).
Remove clear lamp (7) by pressing in on the bulb and
rotating it counterclockwise. Pull clear lamp from
socket (8).
REPAIR
Replace if unserviceable.
Lamps, screws, lens, and
dome light gasket
REASSEMBLY
Dome Iight
Insert red lamp (5) in socket(6). Aline studs in lamp base
Protective Entrance Con-
trol Module
with slot in socket. Press in and turn red Iamp clockwise
until it locks in place.
Insert clear lamp (7) in socket (8). Aline studs in lamp
base with slot in Socket. Press in and turn clear lamp
clockwise until it locks in place.
Place gasket (4) on dome light lens (3).
Place retainer (2) on gasket and aline screw hales.
Position assembly in place and install screws (1).
Tighten securely.
2-67