TM 11591522613
Table 3-1. Controls, Indicators, and Connectors
Controls and Indicator
Function
J72 IN connector
Input connector from turret sliprings.
J71 OUT connector
Output connector to C-2297/VRC and
C-2298/VRC.
POWER CKT BKR
ON-OFF switch and circuit protection.
POWER indicator light
When lighted indicates POWER CIRCUIT
BREAKER is set ON. Turn the lens cap clock-
wise to DIM; counterclockwise to BRIGHT.
on. Adjust the light dimmer control as needed.
3-3. Operating Procedures
a. Starting Procedures (fig. 3-1). Apply
b. Turn-off Procedure (fig 3-1). Set the
power to the F-1461/VRC by setting the
POWER CIRCUIT BREAKER to the OFF po-
POWER CIRCUIT BREAKER to the ON po-
sition. The POWER indicator light should go
sition. The POWER indicator light should go
OFF.
32
