TM 11591522613
CHAPTER 2
SERVICE UPON RECEIPT AND INSTALLATION
Section I. SERVICE UPON RECEIPT OF MATERIEL
curred during shipment. If the equipment has
2-1. Unpacking
been damaged, report the damage on SF 364
The F-1461/VRC is shipped in a cardboard
carton to protect the unit against damage.
When unpacking the F-1461/VRC observe the
following instructions:
and the packing slip to see if the shipment is
complete. Report all discrepancies in accor-
a. Unpack the F-1461/VRC carefully to
keep from damaging the unit.
c. Check to see if the equipment has been
b. Visually inspect the unit for any damage
modified. (Equipment which has been modified
which may have occurred in transit. Save the
will have the MWO number on the cover.)
Check also to see if all currently applicable
eventually requires reshipment.
MWO's have been applied. (Current MWO's
2-2. Checking Unpacked Equipment
applicable to the equipment are listed in DA
Pam 310-1.)
a. Inspect the equipment for damage in-
Section II. INSTALLATION INSTRUCTIONS
2-3. Location
the F-1461/VRC.
tracked vehicle. The F-1461/VRC connects
2-5. Cable Connections
1780/VRC and Intercommunication Control Set
a. Input (J72). Cable assembly CX-
C-2297/VRC or C-2298/VRC. Refer to the
9640/VRC connects to 24 V dc unfiltered at
technical manual covering Intercommunication
turret sliprings.
Set AN/VIC-1 for further installation instruc-
tions.
b. Output (J71). Cable Assembly CX-
4723/VRC connects to the intercommunications
b. Installation hardware is supplied with
control set.
original packing for mounting the F-1461/VRC
c. Remove connector dust caps prior to
attaching cables.
2-4. Mounting Dimensions
21