TM 5-4330-263-13&P
0009 00
Figure 2. 350-GPM Unit Element Replacement
350-GPM UNIT ELEMENT REMOVAL
Diesel/jet fuel is toxic to skin, eyes and respiratory tract. Personnel must wear appropriate hand and
eye protection (nitrile gloves and goggles). Wash skin thoroughly with soap and water if exposed.
Flush eyes with clear water for at lest 15 minutes in case of contact with diesel/jet fuel.
Diesel/jet fuel fumes are toxic in high concentrations. Avoid prolonged breathing of vapors. Operation
and maintenance of the filter/separator should be performed only in a well-ventilated environment.
Failure to follow this warning may result in injury or death to personnel.
Removing head assembly requires a two-man lift to avoid injury to personnel.
CAUTION
Inside surfaces of vessel cover should not be touched in order to minimize the possibility of contamination
of the filter/separator unit. Do not place the vessel cover on the bare ground or in grass to avoid possible
1.
Remove 14 lid bolts (10), flat washers (9) and (6), lockwashers (5), and nuts (4) and remove head assembly (1).
Discard lockwashers (5).
2.
Remove o-ring (8) from vessel (7).
0009 00-4
