Section II. DESCRIPTION AND DATA
5. Description
(2) Electric motor.
Description of the filter unit is contained in TM
Horsepower .......................1
3-4240-241-12.
Voltage ..............................115/230
Cycle ..................................60
6. Tabulated Data
Phase .................................Single
Rating ................................Continuous
a. Weights and Dimensions.
Rated speed........................3,450 rpm
Overall length ....................................... 36 in.
Lubrication .........................Sealed bearings
Overall width......................................... 31 in.
Degree of enclosure ...........Fully enclosed
Overall height ....................................... 37 in.
Rotation ............................Counterclockwise
Weight, crated....................................... 548 lb
Weight, uncrated................................... 325 lb
Cubage, unit crated............................... 11 cu ft
c. Recommended Wrench Torque for Steel Nuts
Floor space required ............................. 7.7 sq ft
and Bolts.
National Fine
National Coarse
b. Characteristics.
Thread size (pound-feet) Thread size (pound-feet)
(1) Gasoline engine.
8-32
1 to 2
8-32
1 to 2
Horsepower.........................1/2 at 3,600 rpm
10-32
1 to 2
10-24
1 to 2
Type ...................................Single cylinder, overhead,
1/4-28
5 to 8
1/4-20
4 to 6
air cooled, 4-cycle.
5/16-24
10 to 15
5/16-18
8 to 12
Rated speed........................3,600 rpm
3/8-24
18 to 27
3/8-15
15 to 22
Starting ..............................Manual; rope on starting
7/16-20
28 to 42
7/16-14
24 to 36
pulley
1/2-20
45 to 68
1/2-13
37 to 56
Spark plug gap....................0.025 in.
9/16-18
64 to 97
9/16-12
56 to 83
Fuel consumption................1/2 pt/hr
5/8-18
98 to 138
5/8-11
75 to 112
Rotation .............................Power shaft end (counter
3/4-16
158 to 242
3/4-10
137 to 200
clockwise)
7/8-14
258 to 384
7/8-9
218 to 316
1-14
400 to 600
1-8
316 to 484
AGO 8757A
5
