TM 3-4240-241-12
Figure 10. Electric motor driven ABC-M-6A1 filter unit
identification plate.
7.
Difference in models
The only difference in the two models of the ABC-
M6A1 gas-particulate filter unit is in the source of power.
Either the gasoline engine or the electric motor is used to
power the filter unit.
8.
Tabulated Data
a. Filter Unit Weights and Dimensions.
Overall length ----------------------- 36 in.
Overall width ------------------------ 31 in.
Overal height ------------------------ 37 in.
A - Engine manufacturer's identification plate
Weight, crated ---------------------- 548 lb
Weight, uncrated ------------------- 325 lb
Cubage, unit crated---------------- 11 cu ft
Floor space required -------------- 7.7 sq ft
b. Gasoline Engine Classifications and Ratings.
Horsepower ------------------------- 11/2 at 36000 rpm
Type ----------------------------------- Single-cylinder,
overhead air cooled, 4
cycle
Rated speed------------------------- 3600 rpm
Starting ------------------------------- Manual; rope on starting
Spark plug gap---------------------- 0.025 in.
Fuel consumption ------------------ pt/hr
Rotation ------------------------------ Power
shaft
end
(counterclockwise)
B - ABC-M6A1 filter unit identification plate
c. Electric Motor Classifications and Ratings.
Figure 9. Gasoline engine driven ABC-M6A1 filter unit
Horsepower ------------------------- 1
identification plates.
Voltage ------------------------------- 115/220
Cycle ---------------------------------- 60
Phase --------------------------------- Single
Rating --------------------------------- Continuous
Rated speed------------------------- 3450 rpm
Lubrication --------------------------- Sealed bearings
Degree of enclosure --------------- Fully enclosed
Rotation ------------------------------ Counterclockwise
11
