TM 3-4230-209-20&P
2-94
2-21. SKID BASE SUBASSEMBLY (CONT).
ACTION
REMARKS
LOCATION/lTEM
Skid Base Subassembly/
Loosen but do not remove hexagon head cap screws (21 and 22) located
Hexagon head cap
on both sides of the engine.
screws (21)
Hexagon head cap
screws (22)
Loosen but do not remove two machine bolts (23) and push gasoline
Machine bolts (23)
Gasoline engine (24)
engine (24) forward.
Matched set V belts (25)
Remove V belts (25) from engine and pump pulleys. Remove V belt (6)
from engine pulley.
Remove two hexagon plain nuts (26), two internal tooth lock
Hexagon plain nuts (26)
Internal tooth lock
washers (27), and two hexagon cap screws (28).
washers (27)
Hexagon cap screws (28)
Remove exhaust mufffer (29) and gasket (30). Exhaust muffle on left
Exhaust muffler (29)
side of engine is installed exactly the right side muffler.
Gasket (30)
e