TM 10-4330-236-13&P
Section I. REPAIR PARTS AND SPECIAL TOOLS LIST
4-1. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
Refer to the Maintenance Allocation Chart contained in Appendix B for maintenance tasks authorized at Unit level and
for the TMDE and support equipment required to perform these tasks.
4-3. REPAIR PARTS.
Repair parts are listed and illustrated in Appendix C, Unit and Direct Support Maintenance Repair Parts and Special
Tools List.
Section II. . SERVICE UPON RECEIPT OF MATERIAL
4-4. SITING.
a.
Transport. The filter-separator is designed and shipped in packing crates. Transport these only on equipment
compatible with the filter-separator.
b.
Site Selection. When selecting a site installation for the filter-separator , consider the overall operating area.
Site should be leveled and large enough to contain the filter-separator and associated hoses.
4-5. SHELTER REQUIREMENTS.
When not in use, the filter-separator does not require special siting or shelter. However, if shelter is available, storing the
filter-separator under cover will minimize the need for maintenance.
4-6. CHECKING UNPACKED EQUIPMENT.
a.
General The filter-separator accessory components are packed and shipped in a packing crate. Accessory
components are stored on the filter-separator under the tank Retain the pacing crate for reuse unless otherwise
directed.
4-2
