TM 10-4330-232-12&P
4-15. Tank.
This task covers:
Replace
INITIAL SETUP
Tools:
Equipment Condition:
General Mechanic's Tool Kit (Item 1, Appendix B)
Valves lines and fittings removed (para. 4-19)
Grounding rod removed (para. 3-6)
Materials/Parts:
Sight gage removed (para. 4-20)
Differential pressure gage removed (para 4-21)
Lockwashers
Canisters removed (para. 4-17)
Replace. (figure 4-6)
(1) Loosen nut (1) and remove rod (2).
(2) Remove two bolts (3), washers (4), lockwashers (5), and nuts (6).
(3) Remove four bolts (7), washers (8), lockwashers (9) and nuts (10) and remove tank (11).
NOTE
Step 4 does not apply to model 13217E7140.
(4) Install tank (11) on frame (12).
(5) Install rod (2) and tighten nut (1).
(6) Install four bolts (7), washers (8), lockwashers (9) and nuts (10).
(7) Install two bolts (3), washers (4), lockwashers (5) and nuts (6).
(8) Install differential pressure gage (para. 4-21).
(9) Install sight gage (para. 4-20).
(10) Install valves and fittings (para. 4-19).
(11) Install canisters (para. 4-17).
(12) Install grounding rod (para. 3-6).
4-14
