TM 10-4330-232-12&P
(10) Install four canisters (12), over elements (13).
(11) Install band clamp (11) and tighten thumbscrew (10).
(12) Install retainer (9) and secure with wing nut (7) and lockwasher (8).
(13) Apply silicone compound to coupling gasket (6).
(14) Install coupling gasket (6) on cover (5)
NOTE
Install cover with vent valve to rear of filter/separator.
(15) Install coupling gasket (6), cover (5), and coupling (4) and secure with two bolts (3), washers (2) and nuts (1).
Figure 4-8. Canister, Replace.
4-19
