Section II. MOVEMENT TO A NEW WORK SITE

Figure 4-1. Typical installation.

4-3. Dismantling for Movement

d. Close the air vent valve and the water drain

valve after draining is complete.

a. Disconnect the inlet and discharge hoses.

Drain them of residual fuel.

4-4. Reinstallation After Movement

b. Open the air vent valve (5, fig. 1-2, sheet 1 of

Inspect, service and install the filter-separator as

2) at the top of the filter-separator.

instructed in paragraphs 4-1 and 4-2.

c. Open the water drain valve (36, fig. 1-2, sheet

2 of 2) to drain water and fuel from the filter-

separator.