TM 3-4230-204-12&P
a. Filling the M11 DECON.
1
2
Carefully unscrew and remove spray head
assembly (4) from container (5).
NOTE
In training or nonhostile
areas, skip steps 3 through 5
and prepare container as
directed by your unit SOP.
Press in on handle locking pin (1), lift thumb
lever, and push down handle (2). Remove
nitrogen cylinder (3).
4
3
a.
Pour DS2 (item 3, app E) into container
NOTE
(5) until can is empty or until it is level
When pouring DS2 into the
with fill line (6). The liquid level should
M11 DECON, be sure there
be even with bottom edge (7) of the
are no lumps or jellied DS2.
filler hole which is at the same level as
If so, do not use this can.
fill line (6).
Obtain another can of DS2.
Do not leave DS2 containers
b.
When filling the Ml 11 DECON using
open because DS2 becomes
the 5 gallon pail (item 3, app E), pour
unserviceable after 48 hours.
until the DS2 is level with fill line.
Be very careful not to cause the can to spray
when opening.
Use a screwdriver (on
vehicle/equipment) to open 1-1/3 quart DS2 can
(item 3, app E).
2-5