TM 10-4330-232-12&P
4-20. Sight Gauge.
This task covers:
Replace
INITIAL SETUP
Tools:
Materials/Parts:
General Mechanic's Tool Kit (Item 1, Appendix B)
Lockwashers (Appendix F)
Gasket, Water Level Sight Gauge (Appendix F)
Replace. (figure 4-15)
(1) Remove two screws (1), lockwashers (2), and washers (3) and remove sight Gauge (4), ball (5) and gasket (6).
(2) Ensure gasket surfaces are clean and old gasket material completely removed.
(3) Install gasket (6), ball (5), and sight Gauge (4) and secure with two screws (1), lockwashers (2), and washers
(3).
Figure 4-15. Sight Gauge, Replace.
4-27
