TM 10-4330-232-12&P
4-12. Cover.
This task covers: Replace
INITIAL SETUP
Tools:
Materials/Parts:
General Mechanic's Tool Kit (Item 1, Appendix B)
Glove, Rubber (Item 2, Appendix E)
Goggles (Item 3, Appendix E)
Silicone Compound (Item 6, Appendix E)
Replace. (figure 4-3)
WARNING
Do not smoke or use open flame in vicinity of filter/separator. Use protective equipment to
prevent skin and eye contact with fuel.
(1) Remove manual vent valve (1).
(2) Remove two nuts (2), washers (3), and bolts (4) and coupling (5).
(3) Remove cover (6) and coupling gasket (7).
(4) Inspect coupling gasket (7) and replace if ripped or otherwise damaged.
(5) Apply silicone compound to coupling gasket (7).
(6) Install coupling gasket (7), cover (6), and coupling (5), and secure with two screws (4), washers (3) and nuts
(2).
(7) Install manual vent valve (1).
4-8
