MWO 3-4240-325-12-1
10. MODIFICATION PROCEDURES.
See the following Appendices:
11. CALIBRATION REQUIREMENTS.
Not Applicable.
12. WEIGHT AND BALANCE DATA.
Not Applicable.
13. QUALITY ASSURANCE REQUIREMENTS.
Not Applicable.
NOTE
Submit below information for every filter whether replaced or not. Some M48A1 filters need not be
replaced. Only PARMATIC-MADE M48A1 GPF NSN 4240-01-363-1311, Lot Numbers beginning
with "P", "PFC", or "PARMATIC" must be replaced.
The organization responsible for MWO application will report application information as follows:
Submission will be comprised of the data elements listed in the table below. Elements 1 and 2 are given for this
MWO (as shown). Submit the application data (information requested in data elements below) by email to: M48-
M48A1GPF@ria.army.mil. An MWO recording form is provided in Appendix F.
NO.
DATA ELEMENT
INPUT DATA
1
Material Change Number
1-03-08-0002
2
MWO Number
3-4240-325-12-1
3
Unit Name
4
Unit UIC
5
Repair Location
6
End Item NSN
7
End Item Nomenclature
8
End Item Serial Number (if applicable)
9
Registration # (if applicable)
10
Filter (#1): M48 or M48A1, check one
_____M48 _____M48A1
11
Filter (#1) Lot No. (NA if M48)
12
Was filter (#1) replaced?
13
If filter (#1) is replaced, note Lot No. of new filter
14
Filter (#2) NSN (if applicable): M48 or M48A1, (check one)
_____M48 _____M48A1
15
Filter (#2) Lot No. (if applicable) (NA if M48)
16
Was filter (#2) replaced?
4
