2-168
TM 3-4230-209-20&P
2-32. LIQUID FUEL WATER HEATER (CONT).
LOCATION/lTEM
ACTION
REMARKS
REASSEMBLY (CONT)
Liquid Fuel Water Heater/
Rear access cover (51)
Insert rear access cover (51) into cabinet frame (45). Position rear access
Machine screws (52)
cover (51) to aline the eight end holes, and install eight machine
Internal tooth lock
screws (52) and secure with eight internal tooth lock washers (53) and
washers (53)
hexagon plain nuts (54).
Hexagon plain nuts (54)
Loop clamp (55)
Coil excess length of capillary tube into a coil no less than six inches in
Machine screw (56)
diameter. Slide loop clamp (55) around the coiled capillary tube and make
Internal tooth lock
sure capillary will not be pinched in the loop clamp (55). Secure with
washer (57)
machine screw (56), internal tooth lock washer (57) and hexagon plain
Hexagon plain nut (58)
nut (58).
Quick disconnect
Wrap the male threads on the pipe coming from the boiler unit (29) with
coupling (59)
antiseizing tape.
Pipe elbow (60)
Screw quick disconnect coupling (59) and pipe elbow (60) onto pipe as a
unit.
