TM 104330-237-13&P
APPENDIX C
UNIT AND DIRECT SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
Section I. INTRODUCTION
1. SCOPE. This RPSTL lists and authorizes spares and repair parts, special tools, special test, measurement, and
diagnostic equipment (TMDE), and other special support equipment required for performance of unit, direct support and
general support maintenance of the Liquid Fuel Filter-Separator. It authorizes the requisitioning, issue, and disposition of
spares, repair parts and special tools as indicated by the source, maintenance, and recoverability (SMR) codes.
2. GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided
into the following sections:
a.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. This lists also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in item name
sequence in FIG. BULK at the end of the section. Repair kits are listed separately in their own functional group
within Section II. Items are shown in the associated illustration.
b.
Section III. Special Tools List. A list of special tools, special TMDE, and special support equipment authorized by
this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE (UOC)
column) for the performance of maintenance.
c.
Section IV. Cross-Reference Index. There are two cross reference indexes in this RPSTL: The National Stock
Number Index, listed in the National Item Identification Number sequence and Part Number Index, listed in
alphanumeric sequence of part numbers appearing in the listing. National stock numbers and part numbers are
cross referenced to each illustration figure and item number appearance.
3. EXPLANATION OF COLUMNS (SECTIONS II AND III).
a.
ITEM NO. (Column [11]). Indicates the number used to identify items called out on the illustration.
b.
SMR Code (Column [21]). The Source, Maintenance and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance level authorization criteria, and disposition instructions,
as shown in the following breakout:
Source
Maintenance
Recoverability
Code
Code
Code
XX
XX
X
1st two 2 positions
3rd position
4th position
5th position
How you get an item.
Who can install,
Who can do
Who determines disposition
replace or use
complete repair*
action on an unserviceable
the item
on the item
item
C-1
