TM 10-4330-237-13&P
(2)
Remove bumper (3) from unisex coupling (2) by hand.
b. Assembly. (Figure 4-10)
WARNING
Rubber gloves should be worn when handling fueling system components due to
the toxic effects of some fuel additives.
(1)
Install bumper (3) on unisex coupling (2) such that the tapered edge is facing toward the coupling body.
(2)
Install dust cap (1) on unisex coupling (2).
4.14 REPLACE UNISEX COUPLING LUGS.
This task consists of:
a. Removal
b. Assembly
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool kit, General Mechanics
None
(Appendix B, Section III, Item 1)
Chemical and Oil Protective Gloves
(Appendix B, Section III, Item 2)
General Safety Requirements:
Equipment Condition:
Liquid fuel filter-separator removed from
WARNING
AAFARS. (TM 10-4930-250-13&P, para. 2.8.)
·
Fuels are toxic and flammable. Do not get on person
or clothing. Work in well ventilated area. Do not
smoke. Ensure equipment is well grounded.
a. Removal. (Figure 4-10)
WARNING
Rubber gloves should be worn when handling fueling system components due to
the toxic effects of some fuel additives.
(1)
Remove dust cap (1) from unisex coupling (2).
(2)
Remove bumper (3) from unisex coupling (2) by hand.
(3)
To remove lugs (4 and 5), remove screws (6).
4-24
