TM 10-4330-237-13&P
(2)
Remove the nut (4), flat washer (5) and rubber washer (6) that secure the separator element (7) to threaded
retaining rod (8).
(3)
Remove the separator element (7) and set aside for cleaning and re-use.
(4)
Unscrew and remove the three coalescer elements (9) and dispose of in accordance with local SOP.
Figure 4-3. Coalescer and Separator Elements Removal
b. Service. (Figure 4-4)
(1)
Clean the separator element (1) in clean fuel and gently wipe the entire screen surface with a soft cloth or very
soft bristle brush.
(2)
Holding the separator element (1) by the end caps (2), visually inspect the entire surface for any nicks or cuts. If
there are any visible flaws, the separator element (1) should be replaced.
4-8
