Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
CHAPTER 1 INTRODUCTION - TM-10-4330-237-13P_6
1.5 DESTRUCTION OF MATERIEL TO PREVENT ENEMY USE
1.7.3 Glossary
Figure 1-1. Advanced Aviation Forward Area Refueling System (AAFARS) Liquid Fuel Filter-Separator
1.9 LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
Section III. PRINCIPLES OF OPERATION
CHAPTER 2 OPERATING INSTRUCTIONS - TM-10-4330-237-13P_12
Section I. DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS
Section II. OPERATOR'S PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - TM-10-4330-237-13P_14
2.2 LEAKAGE CRITERIA.
Table 2-2. Operator's Preventive Maintenance Checks and Services
Section III. OPERATION UNDER USUAL CONDITIONS
SECTION IV. OPERATION UNDER UNUSUAL CONDITIONS - TM-10-4330-237-13P_18
2.10 EMERGENCY OPERATING PROCEDURES
CHAPTER 3 OPERATOR MAINTENANCE
Section III. OPERATOR MAINTENANCE PROCEDURES
Figure 3-1. Face Seal and Dust Cap Seal
CHAPTER 4 UNIT MAINTENANCE - TM-10-4330-237-13P_23
Section II. SERVICE UPON RECEIPT
4.5 UNIT TROUBLESHOOTING - continued.
SECTION V. UNIT MAINTENANCE PROCEDURES
Figure 4-1. Filter Vessel Cover O-Ring Replacement
Figure 4-2. Filter Vessel Cover Torque Pattern
4.7 REPLACE COALESCER ELEMENTS AND SEPARATOR ELEMENT.
Figure 4-3. Coalescer and Separator Elements Removal
Figure 4-4. Separator Element Cleaning
c. Installation.
4.8 REPLACE DEFUELING UNISEX COUPLING ASSEMBLY
Figure 4-5. Defueling Unisex Coupling Assembly
b. Installation.
4.9 REPLACE DEFUELING COUPLING ASSEMBLY.
Figure 4-6. Defueling Coupling Assembly
4.10 REPLACE INLET OR OUTLET UNISEX COUPLING.
Figure 4-7. Inlet/Outlet Unisex Coupling Removal
4.11 REPLACE FLANGE MOUNT THREE-INCH UNISEX COUPLING.
Figure 4-8. Flange Mount Three-Inch Unisex Coupling
4.12 REPLACE UNISEX COUPLING DUST CAP.
Figure 4-9. Unisex Coupling Dust Cap Replacement
4.13 REPLACE UNISEX COUPLING BUMPER
Figure 4-10. Unisex Coupling Bumper and Lug Replacement.
4.14 REPLACE UNISEX COUPLING LUGS
4.15 REPLACE THREE-INCH UNISEX COUPLING DUST CAP LUGS
Figure 4-11. Three-Inch Unisex Coupling Dust Cap Lug Replacement
4.16 REPLACE DIFFERENTIAL PRESSURE GAUGE AND/OR INLET AND OUTLET LINES.
b. Installation of Inlet and Outlet Lines
Figure 4-12. Pressure Gauge and Inlet/Outlet Line Removal
4.17 REPLACE SIGHT GAUGE COMPONENTS
Figure 4-13. Sight Gauge Components
4.18 REPLACE MANUAL VENT VALVE.
Figure 4-14. Manual Vent Valve Replacement
4.19 REPLACE FILTER VESSEL GRAVITY DRAIN PLUG.
Figure 4-15. Filter Vessel Gravity Drain Plug Replacement
Section VI. PREPARATION FOR SHIPMENT OR STORAGE - TM-10-4330-237-13P_58
CHAPTER 5 DIRECT SUPPORT MAINTENANCE
a. Disassembly.
Figure 5-1. Three-Inch Valved Unisex Coupling
c. Assembly.
5.2 REPAIR TWO-INCH VALVED UNISEX COUPLING.
Figure 5-2. Two-Inch Valved Unisex Coupling
a. Inspection.
(8) Install O-ring
APPENDIX A REFERENCES - TM-10-4330-237-13P_67
APPENDIX B MAINTENANCE ALLOCATION CHART (MAC)
B.3 EXPLANATION OF COLUMNS IN THE MAC
B.4 EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS,
Section II. MAINTENANCE ALLOCATION CHART - TM-10-4330-237-13P_71
APPENDIX C UNIT AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
(1) Source Code.
(2) Maintenance Code
(3) Recoverability Code.
4. EXPLANATION OF INDEX FORMAT AND COLUMNS - TM-10-4330-237-13P_76
6. HOW TO LOCATE REPAIR PARTS.
Figure C-1. Filter-Separator, Water, Liquid Fuel
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_79
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_80
Figure C-2. Unisex Coupling, 3-Inch, Flange Mount
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_82
Figure C-3. Unisex Coupling, 2-Inch, MNPT
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_84
Figure C-4. Cable Assembly, Ground
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_86
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_87
DESCRIPTION AND USABLE ON CODES - TM-10-4330-237-13P_88
SECTION IV NATIONAL STOCK NUMBER INDEX
PART NUMBER INDEX - TM-10-4330-237-13P_91
PART NUMBER INDEX - TM-10-4330-237-13P_92
PART NUMBER INDEX - TM-10-4330-237-13P_93
APPENDIX D COMPONENTS OF END ITEM AND BASIC ISSUE ITEM LIST
Section III. BASIC ISSUE ITEMS - TM-10-4330-237-13P_95
APPENDIX E ADDITIONAL AUTHORIZATION LIST - TM-10-4330-237-13P_96
APPENDIX F EXPENDABLE/DURABLE ITEMS LIST
APPENDIX G ILLUSTRATED LIST OF MANUFACTURED ITEMS - TM-10-4330-237-13P_98
Figure G-1. Clamp, Grounding
Figure G-2. Tube, Inlet, Filter-Separator
Figure G-3. Tube, Outlet, Filter-Separator
APPENDIX H TORQUE LIMITS
BOLT STRENGTH IDENTIFICATION, METRIC SYSTEM
STANDARD TORQUE VALUES - ENGLISH SYSTEM
STANDARD TORQUE VALUES - METRIC SYSTEM
APPENDIX I MANDATORY REPLACEMENT PARTS - TM-10-4330-237-13P_106
GLOSSARY - TM-10-4330-237-13P_107
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
