TM 10-4330-236-13&P
4-18.
TANK ASSEMBLY MAINTENANCE.
This tank assembly consists of the components listed below. Refer to the following paragraphs for applicable
maintenance procedures.
Procedures
Page
Identification and Instruction Plates Replacement
4-41
Tank Filter-Separator Maintenance
4-17
4-19.TANK FILTER-SEPARATOR MAINTENANCE.
This tank filter-separator consists of the components listed below. Refer to the following paragraphs for applicable
maintenance procedures.
Procedures
Page
Dust Plug, Dust Cap and tank Couplings Repair
4-17
Pressure Relief Valve and Tubing Replacement
4-21
Pressure Tubing Replacement
4-23
DP Gage Replacement
4-25
Access Cover and Gasket Replacement
4-27
Spider Plate and Filter Elements Replacement
4-29
Water Sump Cover and Gasket Replacement
4-33
Tank Replacement
4-35
4-20.DUST PLUG, DUST CAP AND TANK COUPLINGS REPAIR.
This task covers:
a Removal
b.
Cleaning
c.
Inspection
d.
Repair
e.
Installation
INITIAL SET-UP
Tools
Equipment Conditions
General Mechanics Tool Kit (Appendix B. Section
Filter-separator remove from system, tank drained and
III, Item 1)
water drain valve open. Refer to para 2-6.
Pipe wrench, Adjustable (Appendix B, Section III,
Air vent valve open. Refer to para 2-6.
Item 2)
Water detection adapter assembly removed. Refer to para
2-6.
Materials/Parts
Coupling Gaskets (2) (Appendix C, Section II)
General Safety Instructions
Dry Cleaning Solvent (Appendix F, Section II,
Item 1)
WARNINGS
Wiping Rags (Appendix F, Section II, Item 3)
· Do not smoke within 100 feet of filter-separator.
Thread Sealant (Appendix F. Section II, Item 2)
· Fuel is toxic to skin, eyes, and respiratory tract.
· Sealant is toxic to skin, eyes, and respiratory tract.
· Dry cleaning solvent is potentially dangerous to
personnel and property.
4-17
