TM 10-4330-236-13&P
1-9. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - continued.
For items 12 through 26 refer to figure 1-3.
12.
DP (DIFFERENTIAL PRESSURE) GAGE Enables monitoring condition of filter elements during operation of
filter-separator.
13.
JUMPER CABLE. Provides electrical bonding between the tank and frame.
14.
WHEEL ASSEMBLY. CASTER MOUNT. Swivel type wheels for transport on hard surfaces.
15.
GROUND CABLE Stowed on frame. Provides a means for connecting the filter-separator to the ground rod.
16.
GROUND ROD. Stowed on frame skid. Used to ground filter-separator during operation.
17.
TOW RINGS. Used for tandem towing of filter-separator.
18.
DEFROST DOOR. Manual heat adjustment for defrost shroud.
19.
FUEL OUTFIT. Connection for coupling filtered fuel discharge to fuel system.
20.
ADAPTER ASSEMBLY. Stowed on the frame. This adapter is connected at the filter-separator outlet coupling.
The adapter contains a sampling probe which extends into the fuel flow. A Water Detector Kit may be connected
to the probe for fuel sampling.
21.
WATER DRAIN PORT. Exit for tank water drain.
22.
WATER DRAIN VALVE. Manual valve for draining water from water sump.
23.
WATER SUMP. Collects water separated from fuel.
24.
SCREW JACK. Used to raise filter-separator for changing wheels assemblies for either transporting or in the up
position. Also, used to level the filter-separator.
25.
TANK DRAIN PLUGS. Provide means for complete drainage of tank.
26.
HOT EXHAUST GAS INLET. Connection for hot exhaust gas from system pump assembly.
1-5