TM 10 4330-232-12&P
3-5. Valves Lines, and Fittings.
This task covers:
Service
INITIAL SETUP
Materials/Parts:
Wiping Rags (Item 4, Appendix E)
Service. (figure 3-1)
NOTE
The procedures are the same for both the inlet and outlet fittings.
(1) Remove dust cap (1) from outlet fitting (2).
(2) Inspect gasket (3) and replace if torn or otherwise damaged.
(3) Wipe dust cap (1) with rag.
(4) Install dust cap (1).
Figure 3-1. Valves, Lines, and Fittings, Service.
3-4
