MWO 3-4240-325-12-1
REMOVAL-Continued
3. Remove precleaner/flange assembly (1) from bracket (2).
a. Remove two jamnuts (3) from studs (4) on precleaner/flange assembly (1).
b. Remove precleaner/flange assembly (1) from bracket (2). Clean dirt and dust from precleaner.
Figure E-2.
4. Remove M48 filter (1) from bracket (2). Clean mating surface of bracket.
NOTE
If replacing precleaner or flange, do step 5 and installation step 1.
Figure E-3.
E-2
