a. Using primer coat and forest green enamel, paint the screws and
a. Move the bracket (6) top edge left or right until it is vertical.
nuts to cover any shiny surfaces.
b. Use upper hole in bracket as a guide. Center punch and drill the
second hole. Install a hexagon head cap screw (3) through the
Be sure to put the nitrogen cylinder in the bracket
bracket (6) and through the surface. From the backside of mounting
before mounting your M11 DECON.
surface install second lock washer (4) and hexagon plain nut (5).
b. Position the M11 DECON (2) onto the bracket (6). Fasten strap
around the M11 DECON and latch.
c. Install the third screw (3), lockwasher (4), and nut (5). Tighten.