b. Operating the M11 DECON.
These instructions are given for operating with DS2 filled container. For training use same instructions, but in place of DS2 use a
50/50 mixture of water and antifreeze.
Nitrogen cylinder is highly pressurized. Misuse of
nitrogen cylinder can cause personal injury.
a. Unlatch bracket strap (16) and remove the M11 DECON (17) from
Before servicing or maintaining the M11 DECON, be
the bracket (15).
sure that it is not pressurized by removing nitrogen
cylinder, pointing nozzle away from personnel, and
b. Make sure sealing wire (13) is in place. If broken, do steps 14c.
depressing thumb lever.
and 15 before going to step 16. If sealing wire is not broken or
missing, start with step 16.
Lift up on thumb lever (10) and carefully lift nitrogen cylinder (3) out of hole.
Check neck end of nitrogen cylinder to see if the seal has been punctured.
c. Pull arming pin (4).
If seal has been punctured, the container (5) may be pressurized.