TM 10-4330-236-13&P
4-22.PRESSURE TUBE REPLACEMENT - continued.
(3)
Place clamp (13) over short tube (14) and secure with one screw (12). two flat washers (11). one lock
washer (10) and one nut (9).
(4)
Insert long tube (6) ends in adapters (8) at DP gage (17) and tank ports (18) then secure with nuts (7).
(5)
Place clamp (5) over long tube (6) and secure with four screws (4), four lock washers (3), eight flat
washers (3) and four nuts (1).
Figure 4-12. Pressure Tube Replacement.
4-24