4-12. Cover Assembly
This task covers:
Do not smoke or use open flame in vicinity of filter/separator.
Use protective equipment to prevent skin and eye contact with
Remove 30 nuts (1), lockwashers (2), bolts (3) and washers (4).
To avoid injury, two persons are required to lift the cover from
Remove cover (5) from tank (6).
(1) Unscrew and remove vent pressure valve (1).
(2) Remove packing (2).
(3) Inspect all items and replace items that are worn or damaged.
(4) Coat packing (2) with silicone and install on cover (3).
(5) Coat threads of vent pressure valve (1) with silicone compound and install on cover (3).
Installation. (figure 4-3)
Install cover (5), washers (4), bolts (3), lockwashers (2), and nuts (1) onto tank (6).